Description
The domestic split water heater heat
pump consists of main unit(heat pump) and pressurized
water tank. This tank can be installed indoor or outdoor, and the
main unit should be at a place in good ventilation, using the
refrigerant pipeline to connect with the main unit. Since the whole
system can be installed separately, installation can be more
flexible . It' s suitable for house, villa and small scale places
etc.... to us hot water.
Heat
Pump’s Features
1. Convenience
Full-automatic control, auto-defrosting in winter.Heat pump
is installed outdoor instead of set a special equipment room.
2. Economical
It’s obvious that Heat pump is an energy saving equipment.
The cost of heat pump is comparatively *0% lower than that of oil
burnt and *0% lower than electricity heat. Little expenses on
operation, no need to transport and keep fuel, no need of overhaul
and complex maintenances on the machine and there is no need to
caretaker the machine specifically.
3. Wide Usage
The main component is famous international brand compressor
which can last ****0 hours. Shell and tube or stainless steel plate
heat exchanger is adopted. High efficiency and durable.
4. Friendly
Water Unit is an environment friendly machine which has no
pollution to environment and consumes little energy, produced in
accord with Chinese basic energy and environment protection
policy.
5. Safety
Without fuel tube and fuel storage, there is no chance of
fuel leaks,fire hazard or explosion. We refuse electricity leaks,
dry running and over high temperature by means of setting high
pressure protector, low pressure protector, compressor overcurrent
and overload protector, start delay process, water cutoff switch,
water ultra-temperature protector, water stage protector of water
tank, ect..
6. Durabiity
The suitable ambient temperature for Air-source Heat pump Hot
water Unit is **0~*0℃. It can work all day ling in the seasons
and little affected by bad weather, and this kind of Heat Pump are
widely installed to supply hot water in hotels industries,
residential suburb, villas, saloon, feet massage center hospital,
schools, clubs and so forth.
Power capacity: 1.5HP
Factory code: DKRS***5F
Rated input power(KW): 1.3
Maximum input power (KW): 1.*5
Rated input current(A): 6.0
Maximun input current (A): 9.0
Voltage (V/Hz): **0/*0
Maximum output water temperature(℃):
*0
Rated output water temperature(℃): *5
Rated water pressure(Mpa): 0.7
Water output (L/Hr, *0℃~*5℃)): **8
COP: 2~4.5
Dimension(mm): **0x**0x**0
Tank liquid pipe diameter(mm) : φ6.*5
Tank gas pipe diameter(mm) : φ9.*2
Tank Water pipe interface size : G1/2
Weight(kg): *4
Heat exchange type: Built-in water tank type
Ambient temperature range(℃):
*5~*0
Noise(dB): ≤*0
Waterproof grade: IPX4
Anti-Electric shock type: I
Option water tank: **0~**0L vertical cylindrical tank
type,the material of inner tank is SUS**4, and the material of
outer tank is color spray/ painting /baking paint/stainless
steel.
This data from the test at good ventilation :Ambient temperature:
dry-bulb temperature *0℃/wet bulb
temperature*5℃. water input
temperature *5℃, water
output temperature *5℃.
OEM is available
