Description

�

Standards :

• IEC ********6	IEC ********1
  IEC ********9	IEC ******1
  IEC *********2	IEC ******1,2
  IEC ******1,2	NEK **6:***4

�

Construction :

• Conductors : Circular tinned annealed stranded copper wire to IEC ****8 class 2.
• Insulation : Mica tape + Halogen free EPR compound.
• Twinning : Colour coded cores twisted together.
• Individual Shielding : Each pairs/triples are screened by copper backed polyester tape in contact with a stranded tinned copper drain wire and wrapped with polyester tape. Pairs/triples are numbered with numbered tape or by numbers printed directly on the insulated conductors.
• Bedding : Halogen free compound.
• Armour : Tinned copper wire braid.
• Outer Sheath : Halogen free thermosetting compound, SHF2 (for TYPE S3). Halogen free MUD resistant thermosetting compound, SHF MUD (for TYPE S3/S7), coloured grey (blue for intrinsically safe).

Electrical Characteristics :

• Nominal Cross Section Area	mm�	0.*5	1.0	1.5	2.5
  Nominal Conductor Diameter	mm	1.1	1.3	1.6	2.0
  Maximum Resistant*0?	&branded;/km	*6.3	*9.3	*2.9	8.*2
  Mutual Capacitance	nF/km	*5	*5	**0	**0
  Nominal Inductance1KHz	MH/km	0.**1	0.**1	0.**3	0.**9
  Maximum L/R1KHz	?H/&branded;	*0	*5	*5	*5
  Operating Voltage	V	**0	**0	**0	**0

Mechanical and Thermal Properties :

• Bending Radius : 8�OD (during installation); 6�OD (fixed installed).
• Temperature Range : **0? ~ **0?.