2000Y Full-Auto Vertical Insulating Glass Flat-pressing Productio

Description

1.press machine：

â‘  Technique from Italy

â‘¡ PLC PANASOIC, PANASONIC transducer, WENVIEW monitor from Taiwan, sensor AUTONICS made in South Korea. The main electric parts can run more than *0,**0,**0 times. Its transportation automatically run and realize, speed up – press glass **- two or three pieces of glass & different sizes of glass. It adjusts the size of different glass by servo motor, it is high auto and more exact running.

â‘¢The press part can open and go side to install and maintain the machine. The front box is vacuum, the back box is pneumatic driving. It can deal with two or three pieces of glass and curtain walls.

â‘£when press, it is control by mechanical hand (mechanical position & suck part from Taiwan), all this make the press right position will not dislocation.

⑤ when press, the glass will leave the transportation roll to do in this way it will longer the life time of transportation roller and will not break the glass.

â‘¥ the speed is *5m per minute and it has glass waiting process, its high efficiency will produce **0 pieces of glass in 8 hours.

⑦ the frame is welding from 2.*5 mm international rectangular pipe, high strength of frame and it will not change the shape.

2. washing machine：

â‘ The washing part was welding by stainless steel, it is high strength and shape will not change; the top parts made from *2mm thick stainless steel; the bottom is made from 5mm thick stainless steel, the lateral is made from 2mm thick stainless steel.

â‘¡ OMRON recognition system for low – E glass, it can know if it is the coating side of the low-E glass. If it is Low-E glass the hard brushes will apart avoid damaging the coating of glass.

â‘¢ Six anti-temperature brushes, diameter is **0 mm. Four sprayer, high speed, glass washing clean, speed is about ****2m per minute.

â‘£ The spring is stainless steel and can adjust ***0 mm for different thickness of glass.

⑤ All part contact water include the axle in the washing machine is stainless steel, copper or waterproof aluminum, nylon and so on, it will not rust for long time running ,and easy to maintain.

â‘¥ Gear driving system take chain reaction so it will not leave the original position after long time run.

⑦ Dry part frame is stainless steel will not dirty the glass second time, the circle wind also down the noise.

⑧The circle hot wind down the notice come from the machine (in winter the hot wind temperature can reach *0℃ even no heating).