Description
Pyrolysis Machine Process
Description:
Feed the reactor with raw
materials through the feeding door by labor or machine and then
close it tightly. Heat the reactor with coal, wood or other fuels.
Some harmful smoke will come out along with the heating, but it can
be removed by the desulfurization deduster, the water film cyclone
and the bag deduster. The smoke form the exhaust disposal system is
no different from the air. The draft fan helps to inhale the smoke
from the pipe and then release it into the sky more
quickly.
The oil gas will travel from the
reactor to the gas separate, in which the heavy oil and impurities
will depart from the gas due to the gravity. Then the gas will
continue its journey into the depositing tank for a second
separation. After that , the cleaned oil gas will run into the
cooling condensing pipes in the cooling pool, where the gas will
convert to liquid, the oil, and then flow into the oil tank for
storage.
There will be some waste gas in
the oil tank. It will follow the pipe over the oil tank into the
cooling pool for a second condensing so that the remained oil gas
could turn to oil to improve the oil yield rate. As for the waste
gas, that cannot transform to liquid will go to the water seal and
then to the furnace for burning. It is not only environment
protection but also energy conservation.
1. Pyrolysis Machine
Specifications
1.Energy-saving
2.Automatic welding
3.With ISO ***1, CE certificate
4.Effective deduster
2. Pyrolysis machine oil
output:
Oil yied/day
|
Used tyres,scrap
tyres
|
Big truck
tyres
|
*5%***0%
|
Car tyres
|
*0%
|
Bicycles and motorcycles tyres
|
*0%***5%
|
Waste plastics
|
Fishing net,Safety net,
farm-oriented film
|
*5%***0%
|
Conwenient bags , weave bags
|
*0%
|
Off –cut of recycled paper mill
|
*0%***0%
|
3. Details of Tyre Pyrolysis
Machine
1. The raw materials: waste tires,plastics and rubber
2. Total Capacity: 5 tons/day, 8 tons/day,*0 tons/day,
*2 tons/day
3. the size of reactor:2.2m*6m,2.6m*6m, 2.8m**8m,
2.8m*6.6m
4.Average crude oil: *5%
5.Average carbon productivity :*5%
6. Average steel productivity:
Around *0%, depends on the tire kind
7.Average gas productivity: 5%**0%
8. The decompose temperature: maximum temperature is
******0 degree Cm
9. Coal or firewood cost:
*0kg or *0kg
*0.Discharging time: **3 hours
*1.Feed in time: 2 hour
*2.Reactor depth-ratio: 2/3
minutes
*3.Design pressure: 0.*4 Mpa