Description
APPLICATIONS
Accuracy 1/*0,**0 for any indicator
Load cell 1 to *2 load cells
**0&branded;
Frequency bands **3MH z
Power consumption **0 hours under weighing mode for one load
cell **0&branded;, *9 months under sleeping mode( battery
should be recharged every 5 months)
Range **0 meters
Working temperature**0 degree to **0 degree
Load cell and Indicator wiring connection
1 +Excitation
2 +Signal
3 -Signal
4 -Excitation
5 Shield
Receiver
Excitation ***5V v*3
Output 3mV/V
Transmitter
Excitation 3.3v
Input <*2.9 mv
Power 4V*6V
Enclosure: Aluminum **0x*6x*0mm
Turn on/off: Remote On/Off through weighing indicator.
Power supply: AC/DC Rechargeable battery.
LED light
Red: Low voltage alarm. The battery needs to be
recharged when it is on.
Green: Signal status. Under normal working mode, the Green
light on both transmitter and receiver will flash very fast .It
means the signal is good, when the receiver lose signal, the Green
LED light will flash slowly to search signal, at the same time, the
transmitter will enter sleeping mode .when receiver back to the
signal area, the transmitter will be activated automatically, the
both Green light will flash normally.
Yellow on Receiver: when the indicator is powered on, the
yellow light will be on, it means the system is working.
Yellow on transmitter: it will be on when the AC is on
(battery recharging), the
Yellow light will change to Green when battery fully
recharged.
Note: Please keep the ON/OFF on transmitter always be on,
unless it can not work normally, In this case, Re-start the
system.
