Description
PC series hammer crusher is
equipment using high-speed rotary hammers to crush materials,
mainly applied to the industries of metallurgy, mining, chemistry,
cement, construction, refractory materials and ceramics. It can
crush hard and soft ores into medium or small size, such as barite,
limestone, gypsum, terrazzo, coal, slag, and up to **0 different
kinds.
FEATRURS OF
HAMMER CRUSHER:
Hammer Crusher is
characterized by high capacity, high crushing ratio, uniform
particle size, simple structure, low investment, easy management
and maintenance.
WORKING
PRINCIPLE:
Hammer crusher mainly
consists of frame, rotor, support iron and grate bars. The
frame is divided into two parts: upper part and lower part
which are welded by steel plates after being cut. Liners made of
high manganese steels within the frame can be replaced after being
worn out. The rotors consist of turnplates, pin shafts, and hammers
which are grouped regularly in the main shaft.
The motor drives the
rotors to rotate quickly in the crushing cavity, and hammers spread
outward as a result of centrifugal force from the rotation of the
rotors. Large materials entering the crusher through the feed inlet
are stricken, impacted, cut and ground by the high-speed hammers to
small size. Qualified materials crushed will be screened out and
exit from the gap of grate bars while the unqualified will be left
in the crushing cavity to be further hammered and ground until
reach the standard size. The size of the final product can be
adjusted by changing the grate bars. The gap between the rotors and
the grate bars can also be adjusted according to different
requirement.
PERFORMANCE AND PARAMETER:
|
Type
|
PC**0x**0
|
PC**0x**0
|
PC**0x**0
|
|
Rotor Diameter
(mm)
|
**0
|
**0
|
**0
|
|
Rotor Width
(mm)
|
**0
|
**0
|
**0
|
|
Rotor Speed
(r/min)
|
***0
|
***0
|
**0
|
|
Max Feeding Size
(mm)
|
<**0
|
<**0
|
<**0
|
|
Finished
particle size (mm)
|
***0
|
***5
|
***0
|
|
Capacity
(T/H)
|
**8
|
***5
|
****0
|
|
Power
(KW)
|
*1
|
*8.5
|
*5
|
|
Hammer
Number
|
*6
|
*0
|
*8
|
|
Weight
(ton)
|
0.8
|
1.8
|
2.8
|
|
L*W*H/mm Outlay
Size
|
**5***5***0
|
***0****5****0
|
***0****0****5
|
