FOB Price
Obtener el precio más reciente|
Minimum Order
Place of Origin:
-
Price for Minimum Order:
-
Minimum Order Quantity:
5 Piece
Packaging Detail:
standard package paper carton
Delivery Time:
2-4 weeks
Supplying Ability:
-
Payment Type:
T/T, L/C
Persona de contacto Ms. Nancy
Yushan, Beijing, Beijing
R3L series are passive isolation devices which are used in industrial automation system, transform 4 ~ *0mA signal from on-site instruments to DCS/PLC through isolation. It characterized by the signal isolation, elimination of ground common mode noise and improvement of systemic stability between on-site industrial instrument and DCS/PLC. It contains a variety of combination forms like one-in with one-out, one-in with two-out, two-in with two-out, etc. The casing of the product is only *2mm width, which can fully satisfy the need of on-site high-density installation.
General Specifications |
|||
Construction |
Ultra-thin terminal connections |
Protection grade |
IP*0 |
Connect |
Phoenix terminals with M3 screw |
Mounting |
EN****5 standard symmetrical *5mmDIN guide. |
Wire diameter |
0.**2.5mm2 |
Dimensions |
W*2 x H*5 x D**0 mm |
Tightening |
0.**0.6Nm |
Weight |
About **0g |
Housing material |
Fire resin |
|
|
Input Specifications |
||||
Input voltage range |
*8V~*0V DC; |
the Power of full-load |
≤2W |
|
Absolute maximum input voltage |
*0VDC; |
the Power of no-load |
/ |
|
Power reverse-phase protection |
Yes |
Power overload protection |
Yes |
|
Input Signal Specifications |
||||
Input signal range |
4~*0mA, 0~*0mA, 1~5V, 0~5V, 0~*0V etc. |
|||
Input resistance |
Current signal input: ≤*0W |
|||
|
Voltage signal input: ≥**0KW |
|||
Absolute maximum input |
Current signal: ≤**0mA (withover-current protection) |
|||
|
Current signal: ≤*0V (with over-voltage protection) |
|||
Output Signal Specifications |
||||
Output signal range |
4~*0mA, 0~*0mA, 1~5V, 0~5V, 0~*0V etc. |
|||
Output signal resistance
|
0/4~*0mA:0~**0W Take short circuit protection |
|||
|
0~*0mA output:0~***0W (with cutting-out protection) |
|||
|
0/1~5V output:≥**0KW (with cutting-out protection) |
|||
|
0~*0V output:≥1MW (with cutting-out protection) |
Typical application:
Occasion which is inconvenient of providing power.
Occasion existing grounding potential difference.
Occasion existing high electromagnetic interference.
System needing DCS or PLC protection
Signal distribution in two ways.
If you have any queries, please feel free to contact with us.