Sell Building Opical Receiver/Optica Node (HKTGS-005)

Description

Specifications: 1. High performance PIN photodiodes 2. Low noise, low distortion and low optional power 3. High performance RF module 4. The standard single output model could be extended to two tap or split outputs. 5. Multistage lightning protection devices ensure long-time stable and continuous working. 6. Small-sized, exquisite, conveniently installed, low cost 7. Application for EPON, digital television and bidirectional change 8. Intelligent: RG**5 Ethernet interface is optional, for implementing a monitor system under . Items Units Technical Parameter Optical Power dBm *7 ~ *2 Optical Return Loss dB ≥ *5 Optical Receive Wavelength nm ****- ***0≥ Optical Fiber Connector FC/APC, SC/APC (optional) Operating Fiber Type single model Carrier To Noise Ratio dB ≥ *1 C/CTB dB ≥ *5 C/CSO dB ≥ *0 Operating Frequency Band MHz *5 ~ **0/**2 Flatness In Band dB ± 0.*5 Nominal Output Level dBuV ≥ *4 Max Output Level dBuV ≥ **4 Automatic Gain Control Output Levelremains unchanged when the input optical signal is from *7 to *2. (optional) Gain Adjust Range dB 1 ~ *0 adjustable continuously Slope Adjust Range dB 1 ~ *5dB Fixed attenuations (1dB step)or adjustable continuously Output RF Reflection Loss dB ≥ *6(*5 ~ **0MHz) ≥ *4(**0 ~ **0/**2MHz) Output Impedance &branded; *5 Working Temperature degrees **0 ~ **0 Storage Temperature degrees **0 ~ **0 Power Voltage V AC**5 ~ **5 or AC*5 ~ *0 Annotate: Measures C/CTB, C/CSO and C/N according to the practice.