FOB Price
Obtener el precio más reciente|
Minimum Order
Place of Origin:
jinan,shandong,china
Price for Minimum Order:
-
Minimum Order Quantity:
1 Set
Packaging Detail:
wooden case or on request
Delivery Time:
30-90 days
Supplying Ability:
200 Set per Year
Payment Type:
T/T, L/C
Persona de contacto candice
Jinan, Shandong
1.BRIEF
INTRODUCTION
As an integrator of hammer mill and impact mill, PCFK series of
Impact Hammer Mill is used for secondary crushing of low- and
medium-hardness materials. The size of material can be reduced from
<*0mm to <8mm. The mill enjoys advantages in high and
constant capacity, excellent uniformity of final grain size, low
fine grain content and etc.
2.MODE OF OPERATION
The uniform distribution of the feeding material at the entire
width of the rotor via a vibrating feeder or
a specially-designed inlet chute is requested for achieving an
optimum final grain size as well as a uniform wear of the crushing
parts. After entering the crushing cavity, the feed material is
grasped by the rotating beater heads and then thrown against the
grinding face at high speed to be crushed and again rebound to
beater heads. The material is gradually crushed in a course of dash
and inter-collision repeatedly and discharged out of the end of
grinding face. Product size is determined by rotation speed of the
rotor and gap between the rotor and the grinding wall.
| Mill Type | PCFK***0 | PCFK***2 | PCFK***4 | |
| Feed Materials | Coal, coke, limestone, gypsum,salt, ore and etc. | Coal, coke, limestone, gypsum,salt, ore and etc. | Coal, coke, limestone, gypsum,salt, ore and etc. | |
| Size of Feed Material (mm) | ≤*0 | ≤*0 | ≤*0 | |
| Product Size (mm) | ≤8(*5%≤3) | ≤8(*5%≤3) | ≤8(*5%≤3) | |
| Diameter of Rotor (mm) | ***0 | ***0 | ***0 | |
| Length of Rotor (mm) | ***0 | ***0 | ***0 | |
| Capacity(t/h) | ****0 | ****5 | *****0 | |
| E-motor | Type | Y**5M*6 | Y**5M**6 | YKK*****6 |
| Power(KW) | *0 | **5 | **0 | |
| Rotation Speed(rpm) | **0 | **0 | **0 | |
| Voltage (V) | **0 | **0 | **0 | |
| Fluid Coupling | YOX**0 | YOX**0 | YOX**0 | |
| Mill Type | PCFK***2 | PCFK***6 | PCFK***8 | |
| Mill Type | PCFK***0 | PCFK***2 | PCFK***4 | |
| Feed Materials | Coal, coke, limestone, gypsum,salt, ore and etc. | Coal, coke, limestone, gypsum,salt, ore and etc. | Coal, coke, limestone, gypsum,salt, ore and etc. | |
| Size of Feed Material (mm) | ≤*0 | ≤*0 | ≤*0 | |
| Product Size (mm) | ≤8(*5%≤3) | ≤8(*5%≤3) | ≤8(*5%≤3) | |
| Diameter of Rotor (mm) | ***0 | ***0 | ***0 | |
| Length of Rotor (mm) | ***0 | ***0 | ***0 | |
| Capacity(t/h) | ****0 | ****5 | *****0 | |
| E-motor | Type | Y**5M*6 | Y**5M**6 | YKK*****6 |
| Power(KW) | *0 | **5 | **0 | |
| Rotation Speed(rpm) | **0 | **0 | **0 | |
| Voltage (V) | **0 | **0 | **0 | |
| Fluid Coupling | YOX**0 | YOX**0 | YOX**0 | |
| Mill Type | PCFK***2 | PCFK***6 | PCFK***8 | |
