Description

The NSK range of angular contact ball bearings has been designed to meet the increasingly demanding requirements of original equipment manufacturers. These bearings have a contact angle so that they can sustain significant axial loads in one direction together with radial loads. Furthermore, since an axial component is generated when a radial load is applied, these bearings are generally used in pairs, triplex sets, quadruplex sets, or multiplex sets. NSK offers one of the most comprehensive ranges of angular contact ball bearings available.

The ball rings and nominal contact Angle and greater than 0 °, less than *0 ° rolling bearings. But both radial load and axial load. In high speed can work. The larger the contact Angle, axial bearing capacity is higher. High precision and high speed bearings usually take *5 degrees contact Angle. In the axial force, will increase the contact Angle. Single Angle contact ball bearing can only take a direction of the axial load, in radial load, will cause additional axial force. And only limit shaft or shell in a direction of the axial displacement. If double in pairs, to set a pair of bearing outer lane relatively, namely the wide wide ends, the narrow face with narrow end. So we can avoid cause additional axial force, and can be in two direction the shaft or shell limit in the axial clearance range.