Description

Removing sedimenting solids from liquids of low viscosity such as water and emulsions. Installation as independent cleaning unit on fine machining machine tools.

Function
Due to tangential streaming-in of the liquid, a primary swirl develops. The heavier particles in the liquid, due to centrifugal force, are pressed to the wall of the cyclone housing. Due to the tapering of the conical cyclone housing, a secondary swirl develops in the lower area which leads the cleaned coolant lubricant back in opposite direction. The dirt particles, together with a small amount of liquid (approx. 1.5 l/min), are removed through the underflow nozzle. The admission pressure must be approx. 2 bar.