Description
FC****5MHZ with ATC
Features of the machine:
1, lathe adopts square frame industrial structure design,
gantry, upright, support plate, pulley, tool rest, using aluminum
cast process
2. Complete machine adopts imported Japan YASKAWA servo high
power drive system.
3. Taiwan planetary reducer system, high precision & high
pulling torque.
4. Pinion & rack transmission, adopts original imported
skew pinion & rack transmission.
5, Standard in line 6 tool changes, aluminum casting tool
rest, standard original Taiwan BT*0 tool holder.
6. ATC spindle adopts domestic HD 5.5kw water-cooling spindle,
tool changing time about 6 seconds
7. Motion control system adopts Taiwan SYNTEC special
numerical control system.
8. Driving rail adopts original Taiwan imported *5mm square
lead rail.
9. Z axis adopts Taiwan TBI original coarse pitch precise
rubbing screw rod, high precision transmission
*0 Unique Z axis feeding height **0mm, can be suitable for
complicated workpiece machining.
*1, Imported spindle high performance transducer, high
frequency electronic anti-jamming system.
*2, Patent design cavate vac-sorb table, minimum adsorb area:
**0***0mm, can absorb & clamp.
*3 Vac-sorb 5.5kw air-cooling oil free vacuum pump,
subatomospheric pressure can reach 0.8Mpa
*4, Standard industrial three axis dust prevention design
processing, make whole transmission structure avoid the damage from
dust.
*5, Self-oil system for the transmission part of the complete
machine, extend the service life for each parts.
*6, Cable adopts YC numerical control machine shielding line,
can reciprocate twelve million times.
*7 Equip with standard America industrial aviation plugs
links, soft metal cable sheath, avoids the cable damage situation
from the press & bump effectively.
Technology Parameter
|
Work travel
|
***0****0mm
|
|
Feed-in height
|
**0mm
|
|
Resolution
|
0.**5mm
|
|
Spindle power
|
5.5kw
|
|
Work voltage
|
AC**0V/*0Hz
|
|
Idling speed
|
*0m/min
|
|
Spindle rotating speed
|
*********0rpm/min
|
|
Cutter diameter
|
Ф3.**5 Ф4 Ф6 Ф*2.7
|
|
Command code
|
G code.uoo.mmg.plt
|
|
Adsorb power
|
5.5KW
|
|
Cutter control pressure
|
0.7Kpa
|
|
Work mode
|
AC servo
|
