Sell Pouring machine

Description

Pouring machine is used to mix all the raw materials evenly to reach the physical and chemical standard .we have movable and fixed casting machine.
 

【Productive Process of Aerated Concrete】
（1）.Production Process of Aerated Concrete According to the category and quality of raw material, and the features of equipment, the aerated concrete can be manufactured in different processes. Generally, add water to ash, silica sand or slag and crush them into slurry;
 (2) . Then add powdery lime, cement of right amount, plaster, vesicant, foam stabilizer, and mix and pour it to mould frame;
（3）.After curing, foaming and hardening, cut it into blocks and boards in different specifications;
 (4).Finally, transport it into pressure steamer with steam-curing cart, and get the light cellular concrete after steam-curing with high temperature and pressure.

【Process Flow of an Annual Output *0,**0m******0,**0m3 Aerated Concrete Steam-Curing Production】

(1) Various raw material storage tanks → (2) Mix dosing → (3) add water to raw material and mix them → (4) prepare the mould → (5) pour → (6) foam and wait → (7) release from mould → (8) turn up, cut horizontally and vertically → (9) make into groups and get into autoclave → (*0) cure under high temperature and pressure → (*1) release the finished products from the autoclave → (*2) test the finished products → (*3) pack → (*4) stack and store up → (*5) leave the factory.