10/100M Fiber Media Converter

Description

*0/**0M Fiber Media Converter

Introduction

The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.
Using media converter is a economical solution to achieve long distance transmission base on current status.

FEATURES
1.Built in a *-port switch:
*-Pass all packets without address and CRC check (optional);
*-Supports modified cut-through frame forwarding for low latency;
*-Supports pure converter mode data forwarding for extreme low latency;
*-Supports flow control for full and halt duplex operation;
*-Bandwidth control;
*-Forward ***0 bytes packet for management;
*-Optional forward fragments.
2. Supports **0Base-FX standard;
3.Built in **8Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, *0/**0M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach **0 kilometers;

STANDARD
IEEE**2.3 ETHERNET STANDARD
IEEE**2.3u FAST ETHERNET STANDARD

Fiberunis a leading supplier of *0/**0M Fiber Media Converter. We have a large quantity of *0/**0M Fiber Media Converter in stock and can ship the *0/**0M Fiber Media Converterto you within **3 days. If you have questions about our *0/**0M Fiber Media Converter, please feel free to contact us.
Fiberun is not responsible for typographical or photographic errors.

Manufacturer: Fiberun Optoelectronic Technology

Want to Sell:*0/**0M Fiber Media Converter(1 RJ*5port *0/**0M Fiber Media Converter, 2 RJ*5port *0/**0M Fiber Media Converter, 2 RJ*5port *0/**0M Fiber Media Converter, etc. )

At your service at any time!