AKFIX 100D SHOWER CABIN SILICONE

Description

Properties

• %**0 silicone, does not contain any solvent.
• Cures very fast.
• Almost no shrinkage
• Stays bright and clean.
• Outstanding resistance to mildew and fungus.
• Resistant to temperature extremes and aging.
• Does not crack or discolour.
• Withstands detergents, cleaning agents and chemicals.
• Acetoxy curing system

Applications

• Glazing and bonding in shower cabinets during production.
• Filling joints between tiles, tub and shower cabin during installation.
• Filling joints between bath tubs and tiles.
• Waterproofing sinks.
•  Sealing around bathroom fixtures

Instructions

• Ideal application temperature is between *5 °C and **0 °C. 
• The movement capability of the sealant must be considered to decide the joint design. In order to reduce the deformations of the joints, their depth must be much less than their width,minimum dimensions are 5x5 mm, for wider joints the depth should be preferably half of the width and it is adjusted by the use of a back up material.
• The joint must be tooled with a spatula within 5 minutes of application to ensure good contact between the sealant and the substrate. 
• Excess uncured sealant may be wiped and cleaned with a solvent.