Microprocess Control Panel Meter

Description

V(I)F**0/*0: 3 1/2 & 4 1/2 Analog Indicator
1. Signals input can be AC/DC voltage or from resistive sensor
2. The units can be changed into A(ampere), V(volt), mA (milli-ampere), M/Min or RPM
3. 0.8" LED makes display each to read
4. Percentage, offset and decimal place are settable

V(I)U**1P/*2P Preset Panel Meter with DIP Switch
1. w/ DIP switch, capable of measuring in various signals, such as voltage, current, load cell and potentiometer

V(I)U**1K~*3K Keyboard Preset Panel Meter
1. Capable of measuring various singals such as voltage, current, load cell, potentiometer, etc
2. OUTPUT MODE can be programmed as well

VM*-XXR-XXACV Microprocess Controller Panel Meter
1. Display range: *****9 ~ ****9, can be adjusted by preference with learning function (TEACH)
2. Can display measured value and set value, or peak value at the same time
3. Highly stable with AC/DC *0 ~ **0V power supply

VM*-RLX-XXACV Microprocess Tacho/ Line Speed Meter
1. Display range: 0 ~ ****9, can be adjusted by preference
2. Highly stable with AC/DC *0 ~ **0V power supply
3. Three comparing modes for option. Hysteresis is settable

VM*-FWR-XXACV Microprocess Analog/ Pulse Input Flow Meter
1. Able to calculate square root of the rate value (analog input)
2. Display range:0~*******9 (total value); 0~****9 (rate value), adjustable by preference
3. Digit Height: 0.*6" Red (total value); 0.3" Green (rate value)
4. Sampling Time: *8~*6 times/sec.(analog input); *0~**9ms(pulse input/NPN)

VM*-CX***0ACV Microprocess Communication Display Meter
1. Display range: *****9~~****9
2. Can display measured value, set value or peak value at the same time
3. Highly stable with AC/DC *0 ~ **0V power supply