Rubber Joint SRAXRF-S101/S201

Description

DESIGN DESCRIPTION:
 Design: Manufactory STD;
 Manufacture: Factory STD;
 Flange: ANSI B*6.5, DIN ***1, JIS B***0,BS***4, AS***9, etc.
 Four way greater movements provide;
 High level of installation flexibility;
 Precision molded of synthetic rubber;
 Reinforced with nylon tire cord;
 Excellent ability to absorb vibration and sound;
 Withstand high pressure;
 Withstand chemical corrosion;
 To resist acid and ozone attack.
 Working Press. and Working Temp.:
 DN**-DN**0(**1/2”~*2”):1.6Mpa Max
 DN***-DN**0(*4”~*0”):1.0Mpa Max
 Buna-N: **0℃**1℃(**0°F)
 EPDM: **0℃**0℃(**6°F)
PARTS AND MATERIAL:
NO. PARTS NAME MATERIALS
1 FLOATING FLANGE MID STEEL ZINC PLATE RST ***2
2 WIRE HARD STEEL WIRE
3 REINFORCE NYLON CORD FABRIC
4 BODY CR,EPDM,IIR,NBR,CSM,VITON
OTHER MATERIALS ARE AVAILABLE UPON REQUEST.
DIMENSIONS LIST(UNIT:MM):
Nominal Diameter Allowable Movement (mm) Pressure
Inch mm Face to
Face mm
Temp. C
degree
Travel mm Total
Compressed
Extended
Axial
Compressio
n
Axial
Extension
Lateral
Deflection
Angular
Deflectio
n
Positive
PSIG/BAR at
F/*0 C
Vacuum
Min-Max mm Hg
S**1
**1/4" *2 *5 *0 - **0 ****9 9 6 9 *5 **5(*6) **0
**1/2" *0 *5 *0 - **0 ****9 *0 6 9 *5 **5(*6) **0
2" *0 **5 *0 - **0 *****0 *0 7 *0 *5 **5(*6) **0
**1/2" *5 **5 *0 - **0 ******1 *3 7 *1 *5 **5(*6) **0
3" *0 **0 *0 - **0 ******3 *5 8 *2 *5 **5(*6) **0
4" **0 **5 *0 - **0 ******5 *9 *0 *3 *5 **5(*6) **0
5" **5 **0 *0 - **0 ******0 *9 *2 *3 *5 **5(*6) **0
6" **0 **0 *0 - **0 ******0 *0 *2 *3 *5 **5(*6) **0
8" **0 **5 *0 - **0 ******0 *5 *6 *4 *5 **5(*6) **0
*0" **0 **0 *0 - **0 ******4 *5 *6 *2 *5 **5(*6) **0
*2" **0 **0 *0 - **0 ******4 *5 *6 *2 *5 **5(*6) **0
*4" **0 **5 *0 - **0 ******1 *5 *6 *2 *5 **0(*0) **0
*6" **0 **5 *0 - **0 ******1 *5 *6 *2 *5 **0(*0) **0
*8" **0 **5 *0 - **0 ******1 *5 *6 *2 *5 **0(*0) **0
*0" **0 **5 *0 - **0 ******1 *5 *6 *2 *5 **0(*0) **0
*4" **0 **5 *0 - **0 ******1 *5 *6 *2 *5 **0(*0) **0
S**1
**1/4" *2 **0 - *0 - **0 ******2 *0 *2 *4 *5º **5(*6) **0
**1/2" *0 **0 - *0 - **0 ******2 *0 *2 *4 *5º **5(*6) **0
2" *0 **0 - *0 - **0 ******2 *0 *2 *4 *5º **5(*6) **0
**1/2" *5 **0 - *0 - **0 ******2 *0 *2 *4 *5º **5(*6) **0
3" *0 **0 - *0 - **0 ******2 *0 *2 *4 *5º **5(*6) **0
4" **0 **0 - *0 - **0 ******5 *0 *2 *4 *5º **5(*6) **0
5" **5 **0 - *0 - **0 ******5 *0 *2 *4 *5º **5(*6) **0
6" **0 **0 - *0 - **0 ******5 *0 *2 *4 *5º **5(*6) **0
8" **0 **0 - *0 - **0 ******5 *5 *2 *2 *5º **5(*6) **0
*0" **0 **0 - *0 - **0 ******9 *5 *6 *2 *5º **5(*6) **0
*2" **0 **0 - *0 - **0 ******9 *5 *6 *2 *5º **5(*6) **0
*4" **0 **0 - *0 - **0 ******9 *5 *6 *2 *5º **0 (*0) **0
*6" **0 **0 - *0 - **0 ******9 *5 *6 *2 *5º **0 (*0) **0
*8" **0 **0 - *0 - **0 ******9 *5 *6 *2 *5º **0 (*0) **0
*0" **0 **0 - *0 - **0 ******9 *5 *6 *2 *5º **0 (*0) **0
 We hereby reserve the rights of any alternative dimension that would help to improve our valve's quality and working efficiency.