Description

Horizontal Design:
Pump of “pull-out” design, i.e. the pipework does not have to be disconnected for inspection and dismantling of the impeller and shaft seal.The precision-machining pump shaft is seated in amply, oil lubricated cearings and protected by a shaft sleeve in the stuffing box area.The oil level in  the bearing housing is controlled by way of a"constant level" oiler.
The easily accessible stuffing-box with soft packing can also be supplied with a seal ring and seal liquid.
The integrally cast feet of the casing transmit any forces originating from the pipework directly to the foundation.This means that the rotor is not subject to tanhy bending and optimal working life of the bearings is assured.
The flanges dimension of the tangential, vertical delivery branch and  the axial suction branch for the sizes up to and including ****0 are in accordance with EN***2/DIN ***2(Normal pressure 1.0MPa) and the larger pumps according to nominal pressure 0.6MPa.
Direction of rotation of the pump clockwise, when viewe from the driven end.
Electric motors or combustion engines may be employed for the drive.
To facilitate venting of the suction pipe, the pump set can be provided with a complete venting device.

Performance Range:
Capacities:                   Q up to ***0m3/h
Heads:                           H up to *5 m
Operting Pressure:      P up to 0.6MPa
Operating Temperature t **0~***0C

Application:
Compulsory circulating media pumps for chemical process
Sea water pumps for breeding living things
Pumps for hydro carbon processing industry
Pumps for filter plant
in short what ever clean or slightly polluted, chemically neutral or aggressive liquids have to be transported economically in large quantities and with low delivery heads.

Please detail your specification when making inquires.