Description
Zpm**0 Series is mainly used to press hard-forming materials into
tablets in pharmaceutical industry, chemical, foodstuff, and
electronic industries. Salient Features 1. Fully closed housing
system. Plexiglass doors and windows, stainless steel frame. This
machine is with reinforced layer on the turret, ensuring the
surface is wear resistant. The machine conforms to GMP
requirements.
2. Frequency speed control system adopted on the machine. The
electric motor is fixed on the base plate to prevent the motor from
vibrating during working.
3. The upper and lower guide rails and punches are lubricated with
an intermittent fixed low flow rate automatic lubricating system so
as to reduce the wear of guide rails.
4. A hydraulic overload protection advice is equipped so that the
machine can stop automatically in case of overpressure to protect
the punch pins from being damaged.
5. An air intake adjuster to reduce the flying dust from the tablet
pressing chamber.
6. A high precision pressure sensor is equipped to check the
pressing pressure automatically.
7. The tablet weight control system is with the function of
rejecting unqualified tablets automatically.
8. Different kinds of impellers for force feeder, to meet the
feeding requirement of different raw materials. Technical Data of
ZPM**0 Number of punch and dies(sets) *5 sets, *3sets, *1 sets,
*5sets
Max. Production capacity(PCS/h) **5, **0PCS/h, **6, **0 PCS/h, **5,
**0 PCS/h, **0, **0 PCS/h
Model of P/D(mm) IPT*5.4mm, IPT*5.4mm, IPT*9mm, IPT*9mm
Outer diameter of middle die(mm) *8.1mm, *0.*6mm, *4mm, *2mm
Max. Pre-pressing compression pressure(kn) *8kn, *8kn, *8kn,
*8kn
Max. Main compression pressure(kn) **0kn, **0kn, *0kn, *0kn
Max. Tablet diameter(mm) *5mm, *8mm, *3mm, *1mm
Max. Filling depth(mm) *0mm, *8mm, *5mm, *5mm
Max. Speed of rotary turret(r/min) *5r/min, *0r/min, *5r/min,
*0r/min
Main motor 7.5kw/***0r/min/**0v/*0Hz,
5.5kw/***0r/min/**0v/*0Hz,
Overall Dimensions **0x***0x***0
Net weight(kg) ***0Kg
