CWDM Media Converter (Apt-1124WS33/53OC)

Description

APT****4WS*3OC Gigabit self-adapt single fiber dual-direction Fiber Optic Media Converter APT****4WS*3OC Singlemode single fiber is a single gigabit single fier media converter. Due to single fiber dual-direction media converter&#**9;s photosignal transmit wavelength and receive wavelength are differece, so must be use by pair. One TX and One RX be one pair, can&#**9;t use wrong, if not will can&#**9;t working normal. Singlemode single fiber&#**9;s transmit photosignal wavelength is ***0nm, receive photosignal wavelength is ***0nm; Single fiber dual-direction media converter have one RJ**5 interface and one SC single fiber interface, separate for twisted-pair and fiber to connecting. Single fiber media converter have 6 LED indicator: POWER, SPDFX***0, SPDTX***0, FX Link/Act, TX Link/Act, Fdx. Technical parameter 1. According with IEEE**2. 3ab/z, IEEE **2. 3u, IEEE **2. 3X, IEEE**2. 1Q, *0BASE-T, **0B ASE-TX, ***0BASE-TX, ***0Base-SX, ***0Base-LX standard. 2. Support TCP/IP, PPPOE, DHCP, ICMP, NAT protocol. 3. Flow control: Full-duplex adopt IEEE**2. 3X, half-duplex adopt Backpressure standard. 4. Electricity port support auto-negotiation function, autoconditioning transmit mode and transmit speed. 5. Port supply Auto-MDI/MDIX automatic reverse. 6. Support storage transmit mode, cashe capability is **6K. 7. Support electricity port&#**9;s ***0M mode or self-adapt mode&#**9;s switch. 8. Support state indicator, external power(output 5V~*0HZ 1A) 9. Interface: Electricity port: RJ**5 fiber: SC *0. Twisted-pair: Cat. 5 Cat. 6 *1. Singlemode fiber: 8/**5, 8. 3/**5, 9/**5µ m *2. Working temperature: 0~*0º C *3. Storage temperature: **0~*0º C *4. Humidity: 5%~*0% *5. Size: **0mm***0mm**0mm(L*W*H) Specification Connect type: SC Fiber type: Singlemode Wavelength: ***0/***0nm Typical distance: *0KM Min TX PWR: *6. 0dBm Max TX PWR: 0. 0dBm Sensitivity: less than **2dBm Link budget: *6. 0dBm