Description
Combined machine
TP****8
Single Phase / Three
Phase
Particularly suitable for work with small-medium rod
irons.Both single-phase and
three-phase versions are available.The Single Phase
is equipped in inverter for minimize power consumption without loss
of the power. Heavy and carring struture. The machine is made of
two blocks. The upper part is easily removable for any type of
maintenance. The machine is equipped with 4 wheels for easy
movement. In this machine have been installed sensors eliminating
maintenance of the traditionalposition switches.All parts are
painted with powder eletrostatic paint (polyepoxide) allowing
protection in time. The
rod-bending units feature a cutter welded on one side, designed to
cut and bend bars for reinforced concrete. An affordable and
compact combined unit, ideal for smaller worksites.
Special hardened steel gears and pinions
constantly operate in oil bath in a sturdy reduction gear
casing. All
machines comply
with current EC
regulations and
relevant safety at work.
Electric
motor(Single Phase / Three Phase) KW 2,2 / HP
3
Bending Speed (RPM)
*0
Weight(kg) **5
Dimensions(cm) *5 / *2 / h
*5
BENDING CAPACITY
Capacity Mild / High Tensile Steel R = *5 kg. /
mm²
Number of bars 1 Bar diameters
*6
Number of bars 2 Bar diameters
*8
Number of bars 3 Bar diameters
*4
Capacity Mild / High Tensile Steel R = *5 kg. /
mm²
Number of bars 1 Bar diameters
*2
Number of bars 2 Bar diameters
*6
Number of bars 3 Bar diameters
*2
Standard Equipment
- Pedal for electric control
- Bush Holding Pins, 1 Stirrup Bending Pin
- Checking Block
- Set of Bushes
Optional
- Angle Control
- Stirrup linear measurer can be used also with
stirrup bender
- Bending arm in steel to make large radius bending
- other bushes
Technical Features
- Reduction gear in heavy carpentry with parallel aces with gears
and pinions in steel in bath of oil, with reductions to increase
the bending power.
- Rotating disk in special steel
- Movable saddles in hardened and tempered
steel
