Description
Combined
machine TP****2 Three Phase
Particularly suitable for work with small-medium rod irons. Heavy
and carring struture. The machine is made of two blocks. The upper
part is easily removable for any type of maintenance. The machine
is equipped with 4 wheels for easy movement. In this machine have
been installed sensors eliminating maintenance of the
traditionalposition
switches.All parts are painted with powder eletrostatic paint
(polyepoxide) allowing protection in time. The rod-bending units feature a cutter welded on one
side, designed to cut and bend bars for reinforced concrete. An
affordable and compact combined unit, ideal for smaller
worksites.
Important: The combined units have
not been designed to cut and bend iron at the same time. Gears and
pinions made of special hardened steel feature continuous oil-bath
operation inside a sturdy reduction gear casing. These are very
study iron bending units, designed for high productivity and usable
from both sides, for the greater comfort of the user. Special
hardened steel gears and pinions constantly operate in oil bath in
a sturdy reduction gear casing.
All machines comply with current EC
regulations and
relevant safety at work.
Electric
motor(Single Phase / Three Phase) KW 2,2 / HP
3
Bending Speed (RPM)
*0
Weight(kg) **5
Dimensions(cm) *5 / *3 / h
*5
BENDING CAPACITY
Capacity Mild / High Tensile Steel R = *5 kg.
/ mm²
Number of bars 1 Bar diameters
*6
Number of bars 2 Bar diameters
*0
Number of bars 3 Bar diameters
*6
Capacity Mild / High Tensile Steel R = *5 kg.
/ mm²
Number of bars 1 Bar diameters
*4
Number of bars 2 Bar diameters
*8
Number of bars 3 Bar diameters
*4
Standard Equipment
- Pedal for electric control
- Bush Holding Pins, 1 Stirrup Bending Pin
- Checking Block
- Set of Bushes
Optional
- Angle Control
- Stirrup linear measurer can be used also
with stirrup bender
- Bending arm in steel to make large radius bending
- other bushes
Technical Features
- Reduction gear in heavy carpentry with parallel aces with gears
and pinions in steel in bath of oil, with reductions to increase
the bending power.
- Rotating disk in special steel
- Movable saddles in hardened and tempered
steel
