Description
Bending machine P*2 Three Phase
Particularly suitable for work with medium size rod
irons.Heavy and carring struture.
The machine is made of two blocks. The upper part is
easily removable for any type of maintenance. All machines are
equipped with two long carriage allows the operator to work on both
sides.The machine is equipped with 4 wheels for easy movement. In
this machine have been installed sensors eliminating maintenance of
the traditionalposition
switches.All parts are painted with powder eletrostatic paint
(polyepoxide) allowing protection in time.
Atlas Machinery boasts a broad
range of machines for bending rod irons for reinforced
concrete.
These are very study iron bending units, designed for high
productivity and usable from both sides, for the greater comfort of
the user. Special hardened steel gears and pinions constantly
operate in oil bath in a sturdy reduction gear casing.
All machines comply with current EC
regulations and
relevant safety at work.
Electric
motor(Three Phase) KW 2,2 / HP
3
Bending Speed (RPM)
*0
Weight(kg) **0
Dimensions(cm) *5 / *8 / h
*5
BENDING CAPACITY
Capacity Mild / High Tensile Steel R = *5 kg.
/ mm²
Number of bars 1 Bar diameters
*8
Number of bars 2 Bar diameters
*2
Number of bars 3 Bar diameters
*8
Capacity Mild / High Tensile Steel R = *5 kg.
/ mm²
Number of bars 1 Bar diameters
*6
Number of bars 2 Bar diameters
*0
Number of bars 3 Bar diameters
*4
Standard Equipment
- Pedal for electric control
- Bush Holding Pins, 1 Stirrup Bending Pin
- Checking Block
- Set of Bushes
Optional
- Angle Control
- Stirrup linear measurer can be used also
with stirrup bender
- Bending arm in steel to make large radius bending
- other bushes
Technical Features
- Reduction gear in heavy carpentry with parallel aces with gears
and pinions in steel in bath of oil, with reductions to increase
the bending power.
- Rotating disk in special steel
- Movable saddles in hardened and tempered
steel
