Solution for making pulp molding mould net by yourself

Description

Have you still been worried for your mold net , or suffering the high cost from buying it ? If yes , please check the information below . Our solution will let you out of this trouble . 1. What is our solution ? Use pressing machine , pressing mold and mold net in roll to make the pulp molding wire mesh by yourself . And what your need is to do some simple preparation work first , then using pressing machine to press the wire mesh and shape it automaticlly according to the pattern of pressing mold. 2. Why chosing it ? a. mold net cannot be used forever As we know , mold net will face some problem , such as clogging after using long time . Because of the oxidation (aluminium mold ) and the existence of scale .So after using for a long time , we need to change the mold net to guarantee the products quality . b. It is cheaper than buying wire mesh in piece For this solution , in the first time , you need buy pressing mold , pressing machine and mold net in roll . Then after that , if needing to produce some new mold net , what you need to buy is only mold net in roll. Even though the first time for this solution need buy the three parts above , the cost of it is still *0% cheaper than buying wire mesh in piece. And after that , the cost for new wire mesh is about *0% of purchasing mold net in piece. If needing a further inquiry , please feel free to contact with us . And we will at your service all the time .