Description

Fiber core can be display clearly
SingleX or Y view and X & Y view simultaneously
Auto check quality of  cleaved end face
Auto select best splicing program
9 seconds splice time and *0 seconds heat time
Small bulk and light weigh
5 inch color LCD monitor with clear digital image display
Simple Operation menu
 
Specefications 
 
Model KL***0   
Applicable fibers SM (ITU-T G.**2), MM (ITU-T G.**1), DS (ITU-T G.**3), NZDS (ITU-T G.**5)   
Fiber cleaved length 8~*6mm（Coating diameter：**0µm）
*6mm（Coating diameter: **0 ~ ***0µm）   
Fiber diameter Cladding diameter：*0 ~**0µm
Coating diameter：**0~ ***0μm   
Fiber Count Single   
Fiber aligning method Core  aligning   
Return loss ï¼ž*0dB   
Actual average splice loss 0.*2dB （SM）,0.*1dB (MM),
0.*4dB (DS),0.*4dB( NZDS)    
Splicing mode auto   
Splicing mode *2(templet), **8(user)   
Typical Splicing time Typical 9 sec，with standard SM fiber   
Protection sleeve length *0mm, *0mm and a series of micro sleeves   
Storage of splice result ***0 results，3 parameter per result   
Tension test 2N   
Fiber display and magnification **0X（X or Y view）,**0X（X and Y view）   
Tube heating time Typical *0 sec   
Electrode life ***0   
No.of splice/heating with battery Typical **0 cycles (splice/tube heat) with inner Li-battery   
Display screen 5 inch color LCD monitor   
Image change over The fiber image is turned upside down   
Terminals RS **2   
Operating condition 0 ~ ***0m above sea level,0 ~ *5%RH and **0～*0℃,respectively,Max. wind velocity of *5m/s   
Power supply AC ******0V with AC adapter;inner Li-battery(***0mAH)   
Dimensions **0mm(L) x**0mm (W) x**0mm (H)   
Weight 3.*2 Kg including battery