endless pu timing belt

Description

Stable Dimension**-Low Pull**-Small Noise Wear Out Resistance No need to maintain Excellent Elasticity Top linear speed The construction for Polyurethane timing belt is composed of the back, tensile layer and belt tooth these three parts. (1) Polyurethane Backing The backing of timing belt is to cover with felt the tensile ***** capability is excellent in flexibility and resistance bent fatigue as well as anti-aging, oil resistance, wear out resistance.At the inner surface of the backing has appropriate shap grooves, with the exception of carfts requirements, but also it can improve the bent fatigue properties of tooth and evacuating the air between belt and tooth while in the process of running so that eliminating the noise. (2) Tensile Layer-Steel Cord( or terylene cord) The tensile layer is the tensile component of timing belt for which transfering the power and ensuring the pitch wont be changed during *****-strand steel cord) or terylene cord ) spiraled around the fabric along the rubber belt width, it defines as pitch .The tensile layer must be high tensile strength and bend fatigue strength resistance.Large elasticity moduls and non-stretched feature ensure the pitch cant be changed. (3) Polyurethane Tooth Polyurethane tooth should be high resistance shear strength, excellent in resistance wear out and ***** requirement for pitch array of tooth is very high, the belt tooth should be mesh with pulley correctly, therefore, the correction requirement for tooth geometry parameter is considerable ***** polyurethane timing belt is famous for excellent oil resistance and wear out resistance which is suit for the medium power high speed condition, the entironment should be comparative dry and the running temperature is at **0 *0 C. Polyurethane endless transmission belt is made from special molding process.