Description

Valve Body Type: Two pieces *-way cast ball valve, Concrete structures please see figure 1 Nominal Size: DN*5\*0\*5\*0\*0\*5\*0\**0\**0 \**0 Nominal Pressure: GB PN1.6, 2.5, 4.0, 6.3Mpa ANSI CLASS**0, **0 End Connection: Flange GB PN1.6\ 2.5\ 4.0\6.3 Mpa according to HG*******7M\FM; ANSI CLASS**0\**0 according to ANSI B*6.5 RF and HG/T*******7 Weld type Socket weld according to ASME B*6.*****5, Butt weld according to ASMEB*6.*****5 Screw type according to ASMEB*6.*****5 Flange distance: PN1.6, 2.5, 4.0, 6.3MPa according to GB/T*********9, EN**8.1: ***5, ISO********2 basic series 1 CLASS**0, **0 RF according to EN**8.2: ***5 and ISO********2 basic series 1 Body Material: Please refer to table1 for Operated Temp. & Material contrast Bonnet Type: Same with body Packing Material: V-type compound packing\graphite compound packing\ Graphite packing, Operating Temp. Is shown in table 2 Body Seal Gasket: Spiral wound gasket, Graphite with metal gasket, Zigzag gasket, gasket, Specific materials and suitable temperature range, please see table 3 Packing Gland: Bolts pressure type Oil paint: Carbon steel shell surface required to paint, shell made of stainless steel and copper no painting. Trim Core type: Direct cylindrical port body, floating core, ball core port points L-type (SPLO) and t-type (SPTO), Combined control mode Trim material: Standard material combination and suitable temperature range, please see table 4 Flow characteristics: Quick opening Ball Plug rotor angle: *0° Actuator Type: ***1R series angle travel electronic electric actuators, Power: Single phaseAC**0V± *0% *0Hz, Three phase AC**0V± *0% *0Hz(If need three phase power, please mark out. ) Power consumption: A type *0VA, B type **0VA, C type**0VA Control signal: DC4~*0mA, DC1~5V(Long distance avoid DC1~5V) Output signal: DC4~*0mA, DC1~5V(Load resistance below **0Ω ) Function forms: Changes Positive and negative effects by switch MAX rotor angle: