Description
Polyethylene adhesive tape is tape-shaped Rubber Adhesive layer and
Polyethylene Backing
Cold applied adhesive tape coating systems for anticorrosion of
field joints, fittings, and specifically piping. The Adhesive is a
key in ground performance characteristic coupled with the low and
high density polyethylene backing. This kind of tape can be applied
by hand or with a wrapping machine.
Applications
Protective tape (outer tape) Polyethylene is used as the base
material which is coated by the liquid butyl rubber film, both of
which are pressed and compounded. The film of protective tape is
thicker and higher in intensity.
Protective tape will protect the pipe and its anti-corrosion tape
surface from damages.
Joint wrap tape is mainly used on underground, underwater and
overhead pipelines. The major function for this tape is for
anti-corrosion of pipe
Anti-corrosion tape (Inner tape) Polyethylene is used as the
base material which is coated by the liquid butyl rubber film, both
of which are pressed and compounded. Usually the film is thinner
than the one of anti-corrosion tape while the adhesive layer is
much thicker.
