Sell LK310 dc, ac MT Machine

Description

K**0DC AC, DC magnetic yoke detector uses battery or ac**0V directly supply power. Because of its small volume, light weight, especially suitable for magnetic powder flaw of high and narrow field.

LK **0DC magnetic yoke detectors power supplied by the *2V. 7.5 Amp. Hr batteries.

Probe weight: 3.5 kg

Inter polar distance: 0 ~ **6mm

Lifting force: AC 7kg , DC *2kg

Power supply voltage : dc *2V,ac **0V

Charging: ***2 hours

LK - **0DC (AC/DC) magnetic yoke detector powered by *2V/DC battery, artesian pulse circuit board installed inside of magnetic yoke detector. This circuit provides a very high speed of pulsed DC magnetic field, similar with AC. The DC through magnetic poles can be applied to be the workpiece surface, made a testing debugging intensive DC magnetic field, and detect the surface and near surface defects and detect lesser discontinuous state defects.

Note: this flaw detector use DC power supply, namely it is impossible to get the same sensitivity for small surface defects detection under the circumstances AC magnetic field. Therefore, you should use standard test-components calibration sensitivity in order to detect the smallest defects detection.

LK **0DC meets all the requirements industrial standard on DC magnetic yoke lifting force test, lifting force is *2 kg. Lifting force discontinuities detection ought to be in testing process.

Note: LK - **0DC magnetic yoke detection can use AC **0V dc power supply, but AC**0V power grounding lines should be good grounding, in order to ensure the security of person. AC lifting force is 7 kg.

Accessaries

1, magnetic yoke probe   1 only

2, ac lines AC**0V      1 root

3, packing box          1 only

4, instruction for use     1 copy

5, warranty card         1 portion

6. certificate            1 copy

7, fuse (3A)             5 only