Description

Place of Origin: Beijing China (Mainland) Brand Name: EPSOLAR Model Number: IPS****0 Application: Solar Working Station Rated Voltage: *8V Maximum Current: **0A Specifications The solar controller IPS****0 is used for power station. with big amps . **6 arrays input. Solar controller IPS****0 with big power, which can work with following specifications: *4V, *8V, **0A, **0A Main features: 1. With independent control for each array, self-diagnostic, and alarm. 2. Provide working control for other backup generator. 3. Accurate digital temperature and voltage, signal collects, ensure precise calculation and control, prolong the battery lifetime. 4. Easy operation, LCD display module*4 keys 5. Control circuit is completely separated from main circuit with high anti-jamming ability 6. Can be equipped with RS**2/**5 joint or modem for remote surveillance and control PC monitoring software System terminals: All the terminals are inside of the controller. 1. 6 arrays terminals for solar panel 2. 1 terminal for battery 3. 1 terminal for load 4. 1 *-pin tel. terminals, for computer or modem. 5. 2 output for inverter signal, isolate the switch output signal. 6. 2 input for inverter signal, isolate the switch input signal. 7. 1 terminal for temperature sensor. Item Specifications Remarks Model no: EPIP****0IDC DC input Rated input voltageVDC *8V Voltage range *0~**0V Rated input current *0A / array 6 arrays max. DC output Rated output currentADC *0A Range voltage *4~*7V Depends on the input DC voltage Rated output power 4KW Over load capacity **0% Controller Self-consumption <**0mA Voltage control precision 0.2V Display precision 0.1 Temperature compensation 5mV//Cell 0~*0mV adjustable Low voltageVDC *3.2V Controller switch off High voltageVDC *8V Control point Low voltage disconnectVDC 1.*5~2.*0V/2V default: 1.*0V/2V Can be adjusted through the LCED Low voltageVDC 1.*5~2.*3V/2V default: 1.*7V/2V Low voltage reconnectVDC 2.*6~2.*0V/2V default: 2.*6V/2V Regulation voltageVDC 2.*0~2.*0V/2V default: 2.*2V/2V Equalization voltageVDC 2.*0~2.*0V/2V default: 2.*4V/2V Float voltageVDC 2.*0~2.*0V/2V default: 2.*5V/2V Regulation voltage reconnectVDC 2.*0~2.*5V/2V default: 2.*5V/2V Communication port COM PORT velocity DB9 COM PORT 3line, ***0bps Be equipment with PC DC output VDC **2V, 0.5A For MODEM use Mechanic size As the sample Working environment Working temperature range **0~**0 NoisedB ≤*0dB Humidity 0~*0% no dew altitudem ≤***0 Isolation intensionVAC ***0V Input and output Working time *4 hours Continuous