Description

Product Introduction · The product is ideal for mass production on a special purpose machine and jig on machining ***** will greatly upgrade production efficiency. · When the hydraulic cylinder actuate, and the piston moves downward, the clamping arm will swing to a rated angle!Then it lowers until the workpiece is clamped securely. · To avoid too fast motion a flow control valve is suggested to connect to the hydraulic swing clamp cylinder. Do not clamp workpiece while the clamp is swinging to avoid damaging on the cylinder barrel and internal parts. · When increasing length of clamping arm is required, be sure do not exceed 1.5 times the ariginal length. · The cylinder body is manufactured from structural carbon steel. Surface is specially trested for maximum smoothness on inside surface and long service life. Specifications Bore of cylinder mm ï¿ *5 ï¿ *2 ï¿ *0 ï¿ *0 ï¿ *3 Piston rod diameter mm ï¿ *8 ï¿ *0 ï¿ *2.4 ï¿ *8 ï¿ *5 Swing stroke mm 9 *1 *1 *3 *3 Clamping stroke std/extension mm *3 *5/*0 *5/*0 *7/*4 *7/*4 Pressure area pull/push cm2 2.*7/4.*1 4.9/8.*4 8.*3/*2.*7 *3.*7/*9.*3 *1.*5/*1.*7 Theoretical clamping *0Kg/cm2 *1 **7 **9 **4 **7 Fluid Filtered hydraulic oil Max operation pressure **0Kg/cm2 Operation pressure range ***0Kg/cm2 Rotating direction Turn right R or turn left L Rotating angle Standard angle *0°, Optional angle 0°ï&frac*4;Œ*5°ï&frac*4;Œ*0° Acting type Double acting