Description

1. Maximum temperature: ***0℃ 2. Adopt inorganic fiber made with vacuum molding technology as the insulated material of the chamber, and have special insulated design. 3. MoSi2 rods are set on the two sidewalls insdie the chamber, which is easy to replace. 4. Have double-layer stainless housing. The heat is insulated by the circulating air, so the temperature of the outside surface is very low. 5. Moveable pulling block is set between the furnace body and the controller, which is convenient for putting the fire-screen door and sinter. 6. SCR control, transformer adjusting, PID parameter automatically set, non-interfering manual and automatic operation switch, history data and the temperature-rising curve record without paper, over-temperature alarm, temperature compensation and modification. 7. Have automatic power failure protective function once the door is open. Have over temperature alarm function. Have power failure function once the thermocouple is damaged. Have controlling function with the built-in parameter pass code. 8. Heating rate: ***5℃/min, **-segment automatically heating up programs. 9. Multiple safety protective design. It’s very safe and durable. *0. Provide communication port and Sigma data management software, which can carry out remote control and maintenance. Extra option: 1. Exhaust chimney 2. Glass tube flow meter or mass flow meter, inlet pipe and outlet pipe 3. Set up and debugging, training 4. Spare parts