Description

Product type XLB-D***0×***0/3.*5MN Nominal mold clamping force(MN) 3.*5 Heating plate(mm) ***0×***0 Hot-plate spacing(mm) **0 Working layer 1 Plunger stroke(mm) **0 Pressure per unit area(Mpa) *1.5 Dimensions(mm) ***0×***0×***0 weight(kg) ****0 Product type XLB-D***0×***0/3.*5MN This machine is suitable vulcanized rubber, plastic model products and non-model products. Column structure, mainly by the host, hydraulic station, electric control cabinet composition. Hosts have lower base, plunger, moving platform, on the beam, automatic push-mode device, mold devices mandatory parts. On the beam, between a platform and are equipped with high-quality hot-plate heat shield to prevent heat transfer to the hot plate moving platform, causing working fluid temperature. Machine with automatic mold mandatory, automatic launch of mold and other functions, the PLC can be done automatically under the control of mold, curing time, discharge time and frequency settings, mold, mold, etc. to promote the cycle and set the manual control state, is advanced and reliable products, rubber vulcanization automation equipment.