Description

(C***1/C***6) Specification Model C***1 ×***0 C***1 ×***0 C***1 ×***0 C***6 ×***0 C***6 ×***0 C***6 ×***0 Capacity 　 　 　 　 Swing over bed **0mm(*6") **0mm(*8") Swing over cross slide **0mm(***3/*6") **0mm(***3/4") Swing in gap **0mm(***1/8") **0mm(***1/8") Distance between centers ***0mm (*0") ***0mm (*0") ***0mm (*0") ***0mm (*0") ***0mm (*0") ***0mm (*0") Valid length of gap **5mm(**1/2") Width of bed **0mm(****3/*6") Headstock 　 Spindle nose D**6 Spindle bore *8mm(**1/4") Taper of spindle bore No.6 Morse Range of spindle speed *2 changes, *5ï&frac*2;ž***0r/min Feeds and threads 　 ***** of top slide **8mm(5") ***** of cross slide **5mm(***1/4") Max.section of tool *5×*5mm(1"×1") Pitch thread of leadscrew 6mm or ***** Longitudinal feeds range *2 kinds, 0.**1ï&frac*2;ž1.7mm/rev(0.***1"ï&frac*2;ž0.***3"/rev) Cross feeds range *2 kinds, 0.**4ï&frac*2;ž0.**4mm/rev(0.****3"ï&frac*2;ž0.****7"/rev) Metric threads range *1 kinds, 0.1ï&frac*2;ž*4mm Inch threads range *0 kinds, 2ï&frac*2;ž***** Diametrical pitches range *0 kinds, 4ï&frac*2;ž**2DP Module pitches range *4 kinds, 0.1ï&frac*2;ž7MP Tailstock Dia. of tailstock sleeve *0mm(**5/*6") Travel of tailstock sleeve **8mm(5") Taper of tailstock sleeve No.4 Morse Motor Power of main motor 5.5kW(7.5HP) 3PH Power of coolant pump 0.1kW(1/8HP) 3PH Dimension and weight Overall dimension (L×W×H) cm **0 ×**8×**4 **5 ×**8×**4 **5 ×**8×**4 **0 ×**8×**7 **5 ×**8×**7 **5 ×**8×**7 Packing size(L×W×H) cm **5 ×**2×**2 **0 ×**2×**6 **0 ×**3×**6 **5 ×**2×**2 **0 ×**2×**6 **0 ×**3×**6 Net weight ***0kg ***0kg ***0kg ***0kg ***0kg ***0kg Gross weight ***0kg ***5kg ***0kg ***5kg ***0kg ***5kg Standard accessories 3 Jaw chucka and adapter Wrenches Sleeve and center Oil gun Special accessories 4 Jaw chucka and adapter? Face plates Steady rest? Quick change tool post Follow rest? Driving plate Taper turning attachment