Description

EPIP**-MT SOLAR CONTROLLER FOR SOLAR STREET LIGHT SYSTEM EPIP**-MT series is added more timers based on EPIP**-R, It can realize ON/OFF/ON timer setting. good for street and pathway lighting, parking area, bus station and signage and etc. Features Microcontroller digital accuracy PWM Charge mode State of charge (SOC) Temperature compensation Automatic detection of the voltage External temperature sensor Big terminals and big distance between terminals Double digital LED display, numbers equal to timer setting Two timers setting ON/OFF/ON Electronic protection Short circuit protection Reverse polarity protection Reverse current protection at night Over charging or discharging protection Over load protection Display 4 LED indicators PV: Green –charging Battery: Green-Yellow-Red Load: Red –output on Red slow flashing& blinking shows mistakes The fourth double LED shows timers Technical specification EPIP**-MT series: *2 VOLT or *2/*4 VOLT auto work, *5 AMPS (for PV and load) *2 VOLT or *2/*4 VOLT auto work, *0 AMPS (for PV and load) Equalization voltage: *4.8 Volt Boost voltage: *4.4 Volt Float voltage: *3.6 Volt Low voltage disconnect (LVD) *1.*0 Volt Low voltages reconnect (LVR): *2.6Volt Temperature compensation: **0mv/℃/*2V Self-consumption: 6mA maximum Terminals: for wire sizes to 6mm2 Temperature: **5℃ to **5℃ Notes: It is for *2V system. Please X2 for *4V system. WARRANTY: One year warranty period. Contact EPSOLAR or your authorized distributor for complete term