Medium frequency bending machine

Description

Medium frequency bending machine Some features of Medium frequency bending machine 1 Pipe-type regularization The design and pipes one by one should avoid excessive arc, arbitrary curves, compound bending and more than **0 degree arc. the excessive arc not only make the tooling cumbersome, but also restricted by the machine size of the bending machine; the design of arbitrary curve, compound bending is very unreasonable, greatly hindered the mechanization and automatic production.lead to the operator is difficult to ger rid of heavy manual labor; more than **0 degree arc make medium frequency bending machine can not discharge. 2 Bend radius standardizing Bend radius as far as possible to achieve one pipe-one mould and multi-pipe*-one mould. for one pipe, regardless of whether there are several bends, how the bend angle, there is only one bend radius, because the bending machine don not replace the mould when bending process, this is one pipe-one mould. while, the multi-pipe one mould, refers to the same diameter pipes should use the same bend radius, which using the same set of moulds to bending different type pipes, to reduce the number of moulds. 3 Proper bend radius The size of bending radius, determines the resistance force when pipe in bending ***** general, large diameter, their bend radius is small, when bending, easily occur winkle and slipping phenomenon, bending quality is difficult to ensure, so generally used the R value of mould, which two or three times of the diameter of the pipe.