AP-268 series solventless silicon adhesive

Description

: AP***8 series solventliss silicon resin Ⅰ. Product feature AP***8 series double components liquid silicon adhesive is a kind of silicon that do not contain solvent, heavy metal and aromatic hydrocarbon solvent, it is harmless to human body, and no side products produce during hardening. So it is a kind of environmental friendly macromolecule, it can form a firm film on the surface of the organic glass fiber, and can maintain origin insulation performance after repeating bending. Ⅱ. Typical purposes Mainly use for the coating of glass fiber bushing and silicon adhesive tube and etc. materials. Ⅲ. Application technique a) Treatment fluid preparation: i. In order to avoid foam and uneven situation in the coating, XZY-SR***2 use xylene or toluene to dilute to the require moisture volume, the hardening content of treatment fluid is not the same in different using and hardening condition, usually the water content should be adjust to ****0%. ii. After it is completely dissolved, mix according to percent by weight: **0 shares XZY-SR***2 and 2 shares CA**2. b) Hardening: the actual curing depends on different base material, and use different heating method, but the typical curing time is ****1 under *0℃ for *5min. c) Longevity of treatment fluid: the life span of undiluted raw liquor (add curing agent) in room temperature is over *4 hours; if dilute to *0% of the hardening content, the longevity of treatment fluid is more than one week in room temperature. Ⅳ. Caution i. Mix A and B components properly and respectively before using! ii. The prepared adhesive should be sealed and preserved, and should be use out in safe operation period, otherwise it will slowly become hard and cause waste. iii. The hardening temperature of adhesive has certain relation with temperature. Lower temperature will get slower hardening speed. *****