Description
Portable body, weighing only 7kg, easy to carry & maintain,
maximum output pressure up to ****0psi. The fault can be
self-maintenance during site operation. The medicament can also be
injected into small cracks and pores.
Location:
leak stoppage & waterproof for basement wall, tunnel, subway,
floor, the second joints, cracks, expansion joints, water seepage,
etc.
Usage:
1. Regulating the speed of electric drill up to the maximum, the
hand switch of electric drills at a fixed start, controlling
operation in the switch of wire.
2. Maximum instant pressure of the machine is ****0spi. When
injecting, must consider the pressure degree of water-sealing
needle for reducing the risk.
3. When operating epoxy resin, please do it within approved hours
of epoxy resin operation, referring to the temperature of epoxy
resin. If the temperature of epoxy resin appears to signs of
rising, be sure to stop work immediately and use special cleaning
agent cleaning the machine, making sure to clean up, indeed.
4. This machine is not allowed to inject the liquid with particles,
such as resin mortar.
5. After finishing operation, make sure immediately cleaning the
machine by the special cleaning agent for 2 to 3 minutes. After
washing, stay the cleaning agent inside of the perfusion machine to
avoid medicament residues resulting in jam.
6. Please wear your goggles when injection, avoiding to spray
medicament into your eyes.
7. It is not allowed to pour the particles into the cup when
pouring (to avoid scratching the pressure pump).
Features:
1, Environment protection: good mechanical property, no pollution
& noise
2, Easy operation: portable body, weighing only 7kg, easy to carry
& maintain
3, High efficiency: up to 0~*0Mpa work pressure within a few
seconds, advanced process, time & labor saving
4, Sustained pressure: The sustained high pressure makes the
medicine fully into cracks up to leak stoppage.
5, Long-life machine: The accessories of the machine body is
non-deformed in *0Mpa (max pressure).
With precision machinery, portable and convenience characteristics,
D***9 high pressure grouting machine excludes the previous many
defects and is a professional machine for structure injection with
quick disassembly, maintenance easy & super high pressure, no
needing air pressure source. Also, it can avoid the inconvenience
of heavy machinery for workers and is the best choice for the
persons who work on the professional water-sealing project.
Besides, it can be raised a ***0psi work pressure within a few
seconds, faster than other models in the perfusion time.
Specifications:
Weight:7 kg
Power of the motor: **0W single phase **0V/*0Hz
Maximum output pressure:****0psi
Pressure of starting again: less than ***0psi
Safe range of high-pressure pipe: less than ****0psi
Safe range of switch valve: less than ****0psi
Safe range of nozzle: less than ****0psi
Contact person: Tracy Mobile:**********6 Email: *_*@********************ml>
