Sell electric etching machine ET201/202

Description

Function Introduction 1, After the complete dissolving of the solution, turn on the pump switch at the first , the negative solution will spout from the nozzle. 2, Be sure that the material and anode are connected closely and keep horizontal. 3, Adjust voltage according to the size of the material. The higher voltage, the stronger current. 4, It is working normally that the ammeter hand leaves from“0”ï&frac*4;Œwhen nozzle closes to the ***** nearer material, the stronger current. 5, Finished of the operating rules, Remember turn the voltage regulator to “0”after work finish.Keep current within the prescribe limits.by adjusting voltage when you use if.Do not make the current too strong to spoil the material surface by hot water of some damage happende cause for machine over loading Specification MODLE VOLTAGE WALT VOLTAGE OUTPUT CURRENT OUTPUT DIMENSION WEIGHT ET***1 **0V ****0Hz ***0w ***4V(DC) ***0A *7X*9X*1(cm) *0Kg ET***2 **0V ****0Hz ***0w ***4V(DC) ****0A *7X*9X*1(cm) *5Kg Application By the principle of positive pole dissolves in etching liquid, this machine can etch various pattern and character in the stainless steel, titanium board, gold, silver, copper and any electric conductor.