Sell TDC Flange Forming Machine

Description

TDC unit is one of the two universal flange making systems in the world. It can save time and material drastically with its wel-seal, strong and durable joint structure. So it is specially suitable for producing a duct with a large sectional area. Today many famous buildings in the world utilize this kind of structure in the ventilation system such as the American Kennedy Space Center, Guangzhou CITIC Plaza etc. The unit consists of a feeding frame, main forming machine and a shearing unit, which includes grinder and hydraulic shearing unit. The hydraulic shearing unit makes fixed cutting available with very little burr, and may be operated automatically with a maximum work speed of 6 m/min. It is divided into four types: T**0ã??T**0ã??T**5ã??T**0 with their corresponding duct corner T**0DCã??T**0DC and ***** made by SBKJ may match and produce all the ducts in the DW**4 standard, and has passed the HVAC PW/TMI(***7) pressure test, which is a speciality test for the intensity and sealed condition of a duct. Technical date Type Rolls Shape Edge wide Capacity Motor Weight Dimension SBTDC**0A *8mm 0.8mm 3kw ***0kg ***0Ã?**0Ã?***0mm SBTDC**0A **0mm 1.0mm 3kw ***0kg ***0Ã?**0Ã?***0mm SBTDC**5A **1mm 1.0mm 3kw ***0kg ***0Ã?**0Ã?***0mm SBTDC**0A **1mm 1.2mm 4kw ***0kg ***0Ã?**0Ã?***0mm Type Rolls Shape Edge wide Capacity Motor Weight Dimension SBTDC**0B *6.5mm 0.8mm 3kw ***0kg ***0Ã?**0Ã?***0mm SBTDC**0B **8mm 1.0mm 3kw ***0kg ***0Ã?**0Ã?***0mm SBTDC**0B **6mm 1.2mm 4kw ***0kg ***0Ã?**0Ã?***0mm Type Name Capacity Size Shape T**0DC Duct comer 2.5mm a=*5mm T**0DC Duct comer 3mm a=**5mm T**0DC Duct comer 3.5mm a=**3mm LT**0 Duct comer 3mm a=**5mm T**5DC Duct comer 3mm a=**6mm BC**0 Duct clip 5mm Installation SBKJ TDC angle - flanged joints requires a ordinary circular saw cut for cutting. Cut two lengths of the flanges *0mm shorter than duct overall dimesion. The flanges should be cut in the direction shown to prevent metal cutting damage on the Cut flanges. If any burring has occurred during cutting of the flange, this must be removed before assembly Insert four corners joints into the end of the flange. Please note. Ensure the corners are fully inserted into the flange. Complete the whole frame by securing the corner. The frame to the duct, should be fairly tapped when inserting from one side of the frame and then along the full length of the flange. Fixing the flange into the duct by various methods, spot welding or riveting. Spacing for fastening to be as DW**4 Table 5. Maxmium distance from the corners should not exceed *0mm. When the frame is securely fixed, it is suggested that a duct sealant needs to be applied, on either the inside or outside of the flange and on the corner piece where it meets the duct. Application in duct making 1ã?? Grooving 2ã?? TDF Flange 3ã?? "Câ??Locking Seam 4ã?? Single and Double hem locknection 5ã?? TDC flang 6ã?? Clip 7ã?? Pittsburgh Lock Single lock 8ã?? Snap lock 9ã?? Elbow Lock *0ã??"S" Locking seam *1ã??TDC corner *2ã??Corner conneting