Description

- least-cost router - PRI interface - it is inserted between the PBX and the Public Exchange - 3x E1 interface (**0 / *5 Ohm, RJ *5 / BNC) - signalling E1: ISDN DSS1 / R2 MFC - possibility to change signalling from R2 MFC to DSS1 and vice versa - interface diagnostic: E*-A/B/C - data interface (2x): X.*1/ V*5/ V.*6/ RS**0/ RS**2 - 1x RS**2 (V*4) - interface 1x Ethernet *0/**0 BT for device configuration - calls re-routing from E1A to E1B resp. E1C, based on dial analysis - one-step dial - carrier prefix+called party number - two-step dial - call to carrier, after connect - identification number+called party number(DTMF) - up to *9 spaces for carrier number and *9 spaces for user ID number - calls routing to max.8 carriers resp. no routing - routing exceptions - real or pseudo charging, real time clock - dialling tone **5 Hz detection and ***0/***3 Hz tone detection for real charging - possibility to reserve the specified E1 timeslots for external data transmission- crossconnect (DACCS) - bypass connection E1A-E1B, if the device is off or out of order - calls statistics - local configuration from connected PC via V.*4(RS**2) interface - possibility to save the settings (configuration) to PC - remote configuration using internal ISDN modem, external analog modem or via TCP/IP - possibility to change firmware - upgrade (also remotely)