Description

Product explanation: This tester is a integrated tester for ***** is used to test the continuity, insulation, high-volt, leakage current of power ***** meets the requirements of many international standards such as BIS, UL, CSA, VDE, BSI, DIN, CCC, IEC, ***** is a totally automatic testing machine make your operation more convenient and simple. Features: * All of the test subjects will done automatically. * The inner/outer high-volt output value and persistence time can be adjusted separately. * Test speed is quick, all test subjects will be achieved less than 2 seconds. * The PLC control system is come from Mitsubishi, Made In Japan. * The relay is come from Schneider, Made In French. * If the specimen is incompetent, there is a alarm by buzzer and light. * If the specimen is incompetent, this machine will stop at once and show you which subject is incompetent.After you push the emergency button it will restart a new test.And a switch with key can be made to order to replace the high-volt starting button, it is very useful, because when a alarm happen, the operaters can not restart this machine, only after the managers have checked over and restart it by key the machine will be working again. * When test over, the sample will be pushed out automatically, and a “T” or other characters will be marked on it(English characters only). * Cord set which both have a plug and socket can be tested by this machine. Technical parameter: Polarity test Test E, L, N wires in sequence Insulation test high-volt DC **0V ***0% Insulation resistance 2, 7, *0, *0, **0MΩ(can be made to order) Inner high-volt 0~5KV **5% (adjustable) Outer high-volt 0~5KV **5% (adjustable) Leakage current 0.5, 1, 3, 5, *0mA(can be made to order) Rated power **0VA Cylinder power compressed air with 0.4 to 0.6Mpa Dimensions **0mm W, **0mm D, **0mm H Power source AC **0V ***0%, *0Hz Weight *0 kg, approximate NOTICE: 1, Inner high-volt is applied between