Description

Main technical parameter of Mp type hot die forging press 　 T Basic parameter MP***0 MP***0 MP***0 MP***0 MP***0 MP***0 MP***0 MP***0 MN Nominal pressure *0 *6 *0 *5 *1.5 *0 *0 *3 mm Slider stroke **0 **0 **0 **0 **0 **0 **0 **0 s/mm Strokes per minute **0 *0 *5 *0 *0 *5 *5 *0 mm Max. closed height **0 **5 **0 ***0 ***0 ***0 ***0 ***5 mm Colsed height adjustment *4 *8 *0 *2.5 *5 *8 *2 *5 Worktable size mm ***** **0 ***0 ***0 ***0 ***0 ***0 ***0 ***0 mm F.B ***0 ***0 ***0 ***0 ***0 ***0 ***0 ***0 Slider size mm ***** **0 ***0 ***0 ***0 ***0 ***0 ***0 ***0 mm F.B **0 ***0 ***0 ***0 ***0 ***0 ***5 ***5 top ejector device type machine machine machine machine machine machine machine machine KN pressure *0 *0 **0 **5 **0 **0 **0 **0 mm stroke *5 *7 *0 *4 *8 *2 *0 *0 top ejector device type machine machine machine machine machine machine machine machine KN pressure **0 **0 **0 **5 **5 **0 **0 **0 mm stroke *0 *7 *0 *4 *8 ****0 ****0 ****0 driving motor Kw power *5 *5 **2 **2 **0 **0 **0 **0 r/min rotation speed ***0 ***0 ***0 ***0 ***0 ***0 ***0 ***0 V voltage **0 **0 **0 **0 **0 **0 **0 **0 T total weight *6 **5 **5 **9 **8 **5 **0 **0 contour size mm ***** ***0 ***0 ***0 ***0 ***0 ***0 ***0 ***0 mm F.B ***0 ***0 ***0 ***0 ***0 ***0 ***0 ***0 mm height ***0 ***0 ***5 ***0 ***5 ****5 ****0 ****0 height above ground ***0 ***0 ***0 ***0 ***0 ***0 ***0 ***0 height under ground **0 **0 **5 **0 ***5 ***5 ***0 ***0 contour size of the largest piece mm length ***0 ***0 ***0 ***0 ***0 ***0 ***0 ***0 mm width ***0 ***0 ***0 ***0 ***0 ***0 ***0 ***0 mm height ***0 ***5 ***0 ***0 ***0 ***0 ***0 ***0 T weight of the largest piece *3 *0 *0.5 **5 **5 **0 *5 *8 m3/h water/gas consumption 　 　 　 　 5/*0 　 　 6/**0