Description

C***6E Single-column Vertical Lathe (exported to U.S) Name unit C***6 export Max. turning diameter Mm ***0 Max. turning diameter of side tool post Mm ***0 Table diameter Mm ***0 Max. height of workpiece Mm ***0/***0/***0 Max. weight of workpiece T 5 Rotate range of table r/min ****0 Stage number of variable speed *6 Feeding range of vertical and side tool post Mm/min 0.***6 Feeding stage number of vertical and side tool post *2 Max. cutting force of vertical tool post Kn *5 Max. cutting force of side tool post Kn *0 Max. total cutting force Kn *0 Max. torque of table ***** Level stroke of vertical tool post Mm **5 Vertical stroke of vertical tool post Mm **0/***0 Level stroke of side tool post Mm **0 Vertical stroke of side tool post Mm **0 Beam stroke Mm **0/**0/***0 Moving degrees limit of vertical tool post degree ±*0 Vertical and side tool rest rapid traverse speed m/min 1.8 Beam lifting speed m/min 0.*4 Sectional dimension of cutter bar(length*width) Mm *0×*0 Main motor power Kw *0 Feeding motor power Kw 1.3/1.8 Overall size(L*W*H) Mm ***0****0****8 Weight(about) T *2.8/*4/*4.8 C***6E Single-column Vertical Lathe (for export) (the picture is the product exported to the US.) The super-high quality and mass remarkably surpass the domestic first-class factories. The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC≥*0) while the sliding surface of guide is treated with sticking plastic (including inclined veneers and pressure plate). The precision of the product can be maintained for a long time and the cycle for big repair can be extended as long as more than *0 years. Excellent casting comes from the same factory that the domestic big factories utilize (all are in type of HT**0) and the artificial heat ageing is carried out.