Description

Specification · Less than 0.2 second Response Speed · Less than 0.5 seconds Proximity Time Distance · ***5cm Proximity Range · Support EM-ID **5Khz and Mifare 1 Card (*3.*6 MHz Frequency) · **5℃ to *5℃ Ambient Temperature, *0%**0% Ambient Humidity · Built-in Antenna · Built-in LED (Double Color LED) · Built-in Loud Speaker (Buzzer) · DC *2V Working Voltage, *0mA Working Current · **0 Meters Communication Distance · Real Time Data Transfer · Black Color · PVC Case Material (Black Resin for Water-Proof Function) · **3.5mm**5mm**2.5mm Using + type screw driver to loosen the screw between the panel and motherboard. And then embed the motherboard to the side wall with the plastic plug and screws. Wire Connection Red DC 5V**6V Black GND Blue D1 White D0 Brown BEEP Green LED Yellow Alarm Notice 1. Confirm the electric voltage (DC*2V) and differentiate positive anode and cathode of power supply 2. When external Power is used, make sure sharing the power with Controller Box or using the same GND 3. When the distance between card reader and controller is more than *0m, please use Power Line with at least 1.5 square cm Dia, or using several parallel Network wires