Description

XPS insulation board production line Product introduction: The XPS foam board sheet extrusion line is adopted second-grade extrusion foaming technique which is developed and researched independently in our company. Adopting special screw to achieve the mixing even of gas foaming agent and molten material based on absorbing the international advanced technology; adopting double-grade high-frequency plunger pump to achieve the precise injection of foaming agent; adopting special die head and die lip; adopting hot-oil circulation temperature control for molding device and extruding die lip of foaming board . Meanwhile, all the technical parameters is up to the international advanced level. So the XPS foam board is a insulation material of green environment which corresponds to the policy of station construction energy-saving industry with the good benefit of economy, society and environment. .XPS extrusion molding Polystyrene foam board production line, to produce the Polystyrene foam plastic board material takes the Polystyrene resin as raw material, and add other accessories and polymer, when high temperature molten, it is added the foaming agent, then extrudes the molding rigid foam plastic board. also simply called XPS extrusion molding insulation board. It has continuous even surface layer and the connecting wall of closed-cell type honeycomb structure with the conformity thickness. The clearance will not be found completely, it features the good heat insulation, Low water absorption and the high compressive strength. Technical parameters: Model Output(m3/day) Width of the Sheet (mm) Installed power (kw) Production line Lengthï&frac*4;ˆmï&frac*4;‰ XPS*0/**0 ****0 **0 **0 *5 XPS**5/**0 ******0 **0.**0 **0 *5 XPS**5/**0 ******0 **0.**0.***0 **0 *5 Please feel free to contact us if you are interested in our products. thank you.