Description
Belt dryer, mesh belt dryer, belt dryer in chemicals, belt
dryer machine, dryer, dryer machine for Urea/melamine formaldehyde
molding compound
1.
Introduction
It is the key machine of
aminoplast production. According to different technique
requirements and production scales, we produce four types dryer,
***0 ~ ***0 type, for customer’s choice. With progress of the
industry technology, we can provide several layout design schemes
for same type dryer for process expert’s reference and finalization
per the condition of customer’s original factory
building.
We constantly introduce foreign
advanced technology. After years ofexploration and practice, we have accumulated a lot
ofexperience
in web dryer design. The efficiency
of our driers is increased constantly and our
manufacturingtechnology is improving daily. The dryer we produce can
meet different customers’ each kind of demand.
2.
Application
1). Especially suitable
for continuous production ofsingle species and massive aminoplast. Time setting for
material travel is **0 ~ **0 minutes. Temperature setting for each
section is *0 ~ **0°C.
2). For drying other
granular materials (medicine, other heat sensitive chemical
materials, etc.), travel velocity of web belt can be
set.
3.
Advantages
1). Even air distributor
preventing uneven dryness.
2). Overturning device
preventing material lumping
3). Good seal, works at
negative bias, no smell leaking out, high
dehydratedefficiency
4).
Circulationutilization
of warm air, less waste, high
thermal efficiency. Steam consumption for drying each ton of
aminoplast is approximately 1.8 tons.
5). With light
unloader, material is not easy to get stuck in the net and has good
air permeability, the lifetime of mesh belt is
extended.
6). Driving system runs
smoothly with stepless speed regulation, it is easy
foroperation
andmaintenance
4. Technical
parameter
|
Item
|
Unit
|
WH***0
|
WH***0
|
WH***0
|
WH***0
|
|
Production
capacity
|
T/year
|
***0
|
***0
|
***0
|
***0
|
|
Width of web
|
m
|
1.6
|
2
|
|
Length of dryer
|
m
|
*5
|
*5
|
*7
|
*1
|
|
Times of material
overturning
|
time
|
2
|
3
|
|
Area of radiator
|
m2
|
**0
|
**0
|
***0
|
**0
|
|
Motor power
|
Kw
|
*6
|
*6
|
*4
|
*2
|
|
Steam consumption
|
T
|
0.6
|
0.7
|
0.*5
|
1.2
|
