3-step Lead-Acid Battery Chargers: 300W

Description

******0 DeskTop series: The members of this family of automatic battery chargers can, depending on their rating, charge batteries of up to **0Ah capacity. These chargers, operating in the I-U-U type characteristics, will always start up a new charge cycle in constant current mode. Having reached a cell voltage of 2.4V, the charger changes into the timed absorption-, or constant voltage, mode. Once this pre-set stretch of time has fully elapsed, the charger goes into standby or float charge, with the charge current now down to a trickle. Should the battery, suddenly, be drained by a heavy load connected, the charger will re-start in constant current mode and run its charge routine in full, replenishing the battery&#**9;s energy lost The robust, attractive metal enclosure with its inherently superior shielding properties, is much appreciated when EMC and EMI are an issue. A solid *-way screw terminal block makes connecting and clamping of wire ends, cable lugs or ring terminals, a straight forward and easy task. Attachable mounting brackets turn the desktop charger, in no time, into a wall mount unit. An array of 3 distinctively coloured LEDs clearly indicates the state of charge, a "Mains-LED" lights up when "Mains" is on. Other: Switching technology Mains: IEC *-pin terminal Universal input, ******0VAC Active PFC I-U-U Characteristics *-way screw terminal block Short & reverse polarity protection Safety: EN****5.2.*9, AS/NZ****5.2.*9:***4 EMC / EMI: compliant with EN ******1/2