Description

TECHNICAL DESCRIPTION MEASUREMENTS - Width - ***0 mm - Bottom - ***0 mm - height - ***0 mm - Maximum height of pieces to produce - **0 mm - Minimum capacity of the pieces to produce - *0 mm Useful capacity of the concrete hopper : **0 Litros WEIGHT - HCP 5 Macine without mould - aprox - ***0 Kg - Each complete mould from **0 till **0 Kgs EL?CTRIC EQUIPMENT - Engine for the hydraulic sistem 5,5 c.v - ***0 xxxxx - Engine for the vibration 4 cv - ***0 xxxxx HIDRAULIC EQUIPMENT - Carriages pump of precision - Graduation of the manometer - 0/*0 Bar - Deposit Capacity *0 Lts LUBRICATORS - Vibrators - GALP VELOCE *0/ - Hidraulic oil - GALP HIDROLEP *6/ - Grasseurs - GALP BELONA 2 SERVICE INSTRUTIONS CEMENT MORTAR FOR PRODUCTION OF BLOCKS Cement motar manufacture - Normally the dosages are 6 portions of 1 equal portion of cement. The sand portions will be 5 of the coarse sand more 1 of fine sand. The coarse sands or "Pebble" shall have as maximum dimensions 1/3 of the block density or wallblock density according the type of block (heavy or bored block). The fine sands must have some dust for one best connexion of the cement mortar. The cement used is the normal of comsumption. The mixture must be homogeneous enough. The mixture quality must be semidry, lightly humid. We can prove this quality pressing a little quantity of the cement mortar in the hand. At the same time we must verify if the mixture become homogeneous or on the contrary it become disintegrated. In the last case we must consider the cement mortsr improper, so we must add more fine components. See Table on : http://xxxxx/en/tabela_hcf5.htm Conditions of Payment: *0% sign with the confirmation of the order *0% delivery of the goods Optional Information - HS Code : ***7 Machining Centres, Unit Construction Machines, for Working Metal - Payment : *0% sign - Delivery : *0%