Description

Stainless steel wire mesh products are generally made of stainless steel Type **2, **4, **4L, **6, **6L, **1 and **0 etc. We produce Plain Weave Stainless Steel Wire Mesh Plain weave: Each weft wire passes over one and under one warp wire, and each warp wire passes over one and under one weft wire, every weft wire have and warp wire the same diameter. Characteristics: square aperture , high flow through , relative high open area, as result less pressure drop during filtration suitable for all kinds of filtration up to *3 µm. Twill Weave Stainless Steel Wire Mesh Twill weave: Each weft wire passes alternately over two, and then under two successive warp wires and each warp wire passes alternately over two and under two successive weft wires. It is possible to be used to allow a heavier than standard wire diameter.We can supply the mesh from *0 mesh to **0 mesh. Characteristics: square aperture, less rigid than plain weave, especially suitable for deforming, strong wire cloth due to ratio of wire diameter and aperture, it is mostly used for filtration less than *3 Î&frac*4;m . usage:used in petroleum, chemical industry, mine, environment protection, food industry, paper-making, electronic industry, etc 目数/英寸 丝号 SWG å­”å&frac*4;„ mm 3 *4 6.*7 4 *6 4.*7 5 *8 3.*6 6 *8 3.*6 8 *0 2.*6 *0 *0 1.*3 *0 *0 0.*5 *0 *4 0.*1 *0 *6 0.*4 *0 *8 0.*6 *0 *0 0.*0 *0 *2 0.*1 **0 *4 0.**2 **0 *4 0.*3 **0 *6 0.**8 **0 *6 0.**7 **0 *7 0.*9 **0 *7 0.**7 **0 *8 0.**1 **0 *9 0.**0 **0 *9 0.**4 **0 *9 0.**2 **0 *0 0.***5 幅度:0.6m*1.5m